RR-F-191/3E
TABLE V. Posts of class 5 aluminum H-section.
Post Type Fabric Heights Size
Line All heights AH2
TABLE VI. Posts of class 6 steel square section.
Post Type Fabric Heights Size
Terminal up to 6 ft SS1 over 6 ft SS2
Gate Leaf Widths
Gate up to 6 ft SS2
TABLE VII. Posts of class 7 steel square section.
Post Type Fabric Heights Size
Terminal up to 6 ft AS1 over 6 ft AS2
Gate Leaf Widths
Gate up to 6 ft AS2
3.6 Top rails and braces. Top rails and braces, when required, shall be of the class, grade, and size as specified (see 6.1).
3.6.1 Rail connectors. Top rail lengths shall be fitted with 6-inch connectors of the same material as the rail or shall have a 3-inch long swage on one end for connecting into a continuous run. Suitable fittings shall be provided for securing top rail to each gate, corner, and end posts.
3.6.2 Braces. Braces shall be provided for gate posts and each terminal post when a top rail is not used. When fabric height is 6 feet (ft) or greater, braces shall be furnished with or without top rail.
Braces extending to line post shall be connected back to the base of the brace post by a 5/16 inch minimum outside diameter truss rod and tightener. Double braces shall be furnished when fabric height is over 9 ft.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. (see RR-F-191/GEN)
4.2 Sampling. (see Section 6 of RR-F-191/GEN).
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business